The high-speed Godox QS-1200 II studio flash offers a power of 1200Ws and an aperture adjustment range from 1/1 to 1/32, with an accuracy of up to 0.1 EV. The flash recharge time to full power is less than 1.5 seconds. At minimum power, a very short flash duration of only 1/2000s (t = 0.1) is achieved, allowing free shooting during the session. The flash color temperature is 5600K and can be adjusted within ± 200K depending on the set power. The built-in 2.4 GHz System X receiver allows remote triggering (up to X-Sync), flash power control, and many other options. It is also possible to use a 3.5 mm jack to connect the lamp with triggers from other brands. The rear panel of the lamp has a simple and functional design. The LCD screen displays the lamp settings and is easy to read from different angles. Next to the screen is a convenient knob for power adjustment, changing the radio communication channel, and lamp group. The group of five buttons in the center of the panel provides quick access to all lamp settings and functions. An additional 150 W halogen modeling light can operate independently of the flash power (brightness is manually adjustable) or be linked to the flash itself (proportionally). You can use a wide range of light modifiers, such as umbrellas, softboxes, reflectors, beauty dishers, and other accessories supporting Bowens mount. Features: Mount type - Bowens; Triggering - System X, sync cable, optical; Power supply - AC 230V 50/60Hz; Power control - range of 6 steps with 1/10 increments; Cooling - active; Recycle time - from 0.3 sec to 1.5 sec; Groups/Channels - 16/32; Power control - smooth adjustment, System X; Trigger options - M / S1 / S2 / Slave; Display - LCD; Modeling light - 150W; Aperture adjustment - 1 - 1/32; Series - QS. Product contents: Godox QS1200II studio flash; Protector; Reflector; 150W modeling bulb; Power cable.